LOTO Safety Requisites Trading LLC

EARTHING & SHORT CIRCUIT KIT

USD 1,086.00

Short Circuiting and Grounding Equipment for MV Electric Cabins and Substations.

IN CONFORMITY WITH THE INTERNATIONAL STANDARD EN 61230 – IEC 61230. Icc: 9,6 kA/1 s

● n°3 Screw type universal contact clamps type PC535 made of aluminum alloy tested for high intensity current Hexagonal tang made of galvanized steel.
Clamping capacity:
* round conductors 5-35 mm diameter
* flat conductors 16×40 mm
* bars on horizontal level 5×40 mm
● n°3 Extraflexible electrolytic copper cables of short circuit, covered by transparent silicone sheath, for the connection between the three contact clamps and the central connector. Section 35 mm², length 1,5 m, complete, at the extremities, of tinning copper lugs and reinforcements by transparent heat-shrink sheath.
● Central trifurcating connector.
● Ground electrolytic copper cable, characteristics as above, section 16mm², length 2,5 m
● Brass body-steel handle ground clamp made, clamping capacity up to 33 mm (round conductors and flat bars).
● Backpack for transport and storage.
● CH18 metallic rod, 1m length.
● Insulating rod PE-PV/200EF-TEL, extended length 2m
● Upper element made of vinylester resin reinforced by fiberglass tube, external diameter 32 mm, orange colour, Certified in conformity with the International Standard IEC 61235. Complete of hexagonal CH12-thread M10 fitting type EF on the top.
● Base element made of epoxy resin reinforced by fiberglass, external diameter 40 mm, yellow colour, Certified in conformity with the International Standard IEC 61235 Complete of lower rubber cap and hand guard.
● Special double locking system to work at every extension of the stick from about 1,1m up to 2m.
● Bag for transport and storage of the rods.

Model No.: MT/535-S3/1,5-1/2,5-PE-PV/TEL-BPS
Origin: Italy

Short Circuiting and Grounding Equipment for MV Electric Cabins and Substations.

IN CONFORMITY WITH THE INTERNATIONAL STANDARD EN 61230 – IEC 61230. Icc: 9,6 kA/1 s

● n°3 Screw type universal contact clamps type PC535 made of aluminum alloy tested for high intensity current Hexagonal tang made of galvanized steel.
Clamping capacity:
* round conductors 5-35 mm diameter
* flat conductors 16×40 mm
* bars on horizontal level 5×40 mm
● n°3 Extraflexible electrolytic copper cables of short circuit, covered by transparent silicone sheath, for the connection between the three contact clamps and the central connector. Section 35 mm², length 1,5 m, complete, at the extremities, of tinning copper lugs and reinforcements by transparent heat-shrink sheath.
● Central trifurcating connector.
● Ground electrolytic copper cable, characteristics as above, section 16mm², length 2,5 m
● Brass body-steel handle ground clamp made, clamping capacity up to 33 mm (round conductors and flat bars).
● Backpack for transport and storage.
● CH18 metallic rod, 1m length.
● Insulating rod PE-PV/200EF-TEL, extended length 2m
● Upper element made of vinylester resin reinforced by fiberglass tube, external diameter 32 mm, orange colour, Certified in conformity with the International Standard IEC 61235. Complete of hexagonal CH12-thread M10 fitting type EF on the top.
● Base element made of epoxy resin reinforced by fiberglass, external diameter 40 mm, yellow colour, Certified in conformity with the International Standard IEC 61235 Complete of lower rubber cap and hand guard.
● Special double locking system to work at every extension of the stick from about 1,1m up to 2m.
● Bag for transport and storage of the rods.